Overview: Conducted TD + Arduino connection tests. Finalized visual effects, installation form, and breathing guidance approach.
进行了TD + Arduino连接测试,确定了视觉效果、装置形式以及呼吸引导方式.
Members: Yixuan Zhang, Can Huang, Li Lyu, Hefan Zhang，Xinyi Qian
Connection Test 连接测试
- Tested Temp/Humid Sensor.
测试了Temp/Humid Sensor。
- Issue: Data changes were detected, but the displayed value was “loudness,” and the signal variation was weak (power amplification might help).
有数据变化，但显示的值为loudness，且信号变化小（可以尝试功率放大）。
- Solution: Consult GPT or reach out to Joe for further assistance.
询问GPT或者联系Joe寻求解决方案。
Visual Effects 视觉效果
img1: references for visual effect
Primarily abstract, encouraging any experimental or suitable effects (e.g., particles, organic abstract forms) to create a relaxing experience for the audience. Visuals should complement the auditory elements and are divided into two aspects:
以抽象形式为主，鼓励任何想尝试/合适的效果(如粒子、抽象的有机形式……)，能给观众带来放松的感受即可。视觉效果与听觉相辅相成，分为两个方面:
- Stable, pre-set initial image: Guides the audience’s breathing through smooth visual transitions, based on a 4:6 or 5:5 breathing pattern (undetermined)(LFO CHOP in TD can generate stable periodic signals).
- Breathing-driven dynamic image: Changes according to the audience’s breathing with more noticeable variations (If the signal is weak, Math CHOP can amplify it; if unstable, Filter CHOP can smooth it).
- 稳定的、预设的初始图像: 通过稳定的图像变化，对观众进行呼吸引导（基于4:6或者5:5的呼吸模式（还有待确定），可以在TD中使用 LFO CHOP（低频振荡器）生成平稳的周期性信号）
- 由呼吸数据驱动的变化图像: 随着观众的呼吸而变化，是一种相对明显的变化（如果信号不稳定，可以在TD中使用Math CHOP（信号放大）；信号不平稳可以使用Filter CHOP（信号平滑））
The two types of visuals should be distinct but maintain a unified aesthetic. Considerations for color, graphical language, and transition methods between the two visuals should be explored.
两种图像需要有所区分，但仍保持整体视觉风格统一，可以考虑以下方面（色彩、图形语言、两种图像之间的过渡方式……？）
Example：一些可能的参考，是动图，请不用局限于此! 🙂
3.https://www.pinterest.com/pin/3870349674035224/
4.https://www.pinterest.com/pin/1548181177675743/
5.https://www.pinterest.com/pin/70016969202861487/
6.https://www.pinterest.com/pin/296393219255209075/
7.https://www.pinterest.com/pin/13721973860622099/
8.请随意补充
Installation 装置形式
img2: references for installation
1.Breath Interaction Device: A sensor is placed inside a portable/handheld container, allowing the audience to blow air in a comfortable position. (Providing cushions?)
- 吹气装置：将传感器放入可移动/手持的容器中，让观众以自身舒适的状态进行吹气。（提供坐垫？）
2.Main Installation: A breath-themed sculptural installation, combining plant and organ-like forms using lightweight, transparent, or semi-transparent materials to create an organic and lifelike effect. (Examples: Transparent resin + pigments for organ models; heat gun + plastic for plant-like structures.)
2.主装置：以“呼吸”为主题的造型装置，用质感较轻、透明或半透明的材质制作植物和器官结合的装置，使其具备有机感和生命感。（例如：用透明树脂+色素制作器官模型；用热风枪和塑料制作植物造型）
3.Lighting: Breathing lights / LED strips enhance the ambient atmosphere. LED strips connect the two installations or serve as decorative data lines, controlling the light variation speed (slow and smooth).
3.灯光：呼吸灯/LED灯条作为场地装饰增强氛围感。用灯条连接两个装置/装饰数据线, 控制灯光变化速率（缓慢、流畅）。
Examples:
- https://vimeo.com/groups/748223/videos/229735045
- https://www.bilibili.com/video/BV1Ja4y1u7bP?spm_id_from=333.788.recommend_more_video.0&vd_source=98a9f21f8926b87ae9b0222479b370ec
- 请随意补充
