Any views expressed within media held on this service are those of the contributors, should not be taken as approved or endorsed by the University, and do not necessarily reflect the views of the University in respect of any particular issue.

Tag: ardunio

Ardunio sensor testing 2

Test content: Use of sound sensors
Test result: Success! The sensor senses well, the value changes significantly during the interaction and gives the correct display feedback.
Tester: li
Test date: 13/02/2025

Test: Temperature and humidity sensors and connection of Ardunio&TD
Test result: Failed. The direction of the sensor display is off, and does not read the temperature and humidity values but displays the distance values, and there are also errors in the combination of the two software, which need to be modified with the advice of professionals.
Tester: Li & Yixuan & Can
Records: Xinyi & Hefan
Test Date: 14/02/2025

css.php

Report this page

To report inappropriate content on this page, please use the form below. Upon receiving your report, we will be in touch as per the Take Down Policy of the service.

Please note that personal data collected through this form is used and stored for the purposes of processing this report and communication with you.

If you are unable to report a concern about content via this form please contact the Service Owner.

Please enter an email address you wish to be contacted on. Please describe the unacceptable content in sufficient detail to allow us to locate it, and why you consider it to be unacceptable.
By submitting this report, you accept that it is accurate and that fraudulent or nuisance complaints may result in action by the University.

  Cancel