Any views expressed within media held on this service are those of the contributors, should not be taken as approved or endorsed by the University, and do not necessarily reflect the views of the University in respect of any particular issue.

Part 2 – The process of confusing process of objects

1. Modelling section

I modeled objects that elderly people tend to forget globally through C4D, which included fan, television, radio, and tank. I made sure that they were the same size and that they were labelled with different materials.

   2. Point cloud particle effect section

I added point cloud particles to the already built obj. model via meshlab to allow it to change dynamically once imported into touch designer.

3. Dynamic section

I used a timed loop of explosions and reorganizations of each object through touch designer as a way of simulating the patient’s fragmented memory of the forgotten objects.

4. Background Environment section

I used runway to generate videos of images of home in patients’ minds from around the globe and had these videos interspersed with objects. The aim was to increase the immersion of the person experiencing the experience.

Leave a Reply

css.php

Report this page

To report inappropriate content on this page, please use the form below. Upon receiving your report, we will be in touch as per the Take Down Policy of the service.

Please note that personal data collected through this form is used and stored for the purposes of processing this report and communication with you.

If you are unable to report a concern about content via this form please contact the Service Owner.

Please enter an email address you wish to be contacted on. Please describe the unacceptable content in sufficient detail to allow us to locate it, and why you consider it to be unacceptable.
By submitting this report, you accept that it is accurate and that fraudulent or nuisance complaints may result in action by the University.

  Cancel