Vessels and cutlery set



These are my vessel that I made using the revolve and rail revolve commands which I used the curve tool and the star tool. I then used the offset command to close the line drawing so that the vessels could have volume. I really enjoyed creating these shapes as the vessels could be used for a number of things for example, a vase, bowl for fruit or to hold things in.


These are my cutlery set that I was designing to practice with. I  found the spool easy to design using the commands that I have learned so far in the class. The knife and fork was what I struggled with as when I tried to join the handle and edges there would be a place where they weren’t joined. I used the naked edges command to check and there was naked edges in between the handle and top part of the cutlery.

Leave a reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>


Report this page

To report inappropriate content on this page, please use the form below. Upon receiving your report, we will be in touch as per the Take Down Policy of the service.

Please note that personal data collected through this form is used and stored for the purposes of processing this report and communication with you.

If you are unable to report a concern about content via this form please contact the Service Owner.

Please enter an email address you wish to be contacted on. Please describe the unacceptable content in sufficient detail to allow us to locate it, and why you consider it to be unacceptable.
By submitting this report, you accept that it is accurate and that fraudulent or nuisance complaints may result in action by the University.