Any views expressed within media held on this service are those of the contributors, should not be taken as approved or endorsed by the University, and do not necessarily reflect the views of the University in respect of any particular issue.

Month: October 2020

Week 6 has consisted of making sure that all of my prior work is up to date such as that all my research was correct and improving upon any mistakes that I had made in my CAD designs in the past couple weeks. Some of the major edits I have done on my floor plan […]

What I learnt in week 5 is how to use layouts, viewports as well as how to create a drawing border. Other useful information that we went over in the lecture consists of features such as, annotations, plotting my  drawings.  When I was choosing the floor plan online I forgot that we were given a […]

Before I start on the pavilion I did some exercises to warm up and get to grips with the tools and feel comfortable within the software. Here you can see a few of the orthographic exercises that I completed. I then chose to create these in Fusion as I also wanted to improve my three […]

Unfortunately I was diagnosed with CoVid 19 during week 3, so I wasn’t feeling too well and found it rather challenging to focus and work, due to the state that I was in. I had a really bad cough, shivers and headache. Some of the highlights from this CAD course during this week consisted of […]

Prior to the week 2 lecture I spent some time watching some autocad lectures which allowed me to learn features that we had not yet covered. This allowed me to get a bit of a head start with the autocad week 2 lecture. So when it came to the lecture I was pleasantly surprised that […]

I am very much so looking forward to learning new cad software as I have had some experience in the past using corel draw. I spent my first week getting used to the controls and commands of Autocad. I was able to get to grips with the basic ui and ux  of autocad due to […]

css.php

Report this page

To report inappropriate content on this page, please use the form below. Upon receiving your report, we will be in touch as per the Take Down Policy of the service.

Please note that personal data collected through this form is used and stored for the purposes of processing this report and communication with you.

If you are unable to report a concern about content via this form please contact the Service Owner.

Please enter an email address you wish to be contacted on. Please describe the unacceptable content in sufficient detail to allow us to locate it, and why you consider it to be unacceptable.
By submitting this report, you accept that it is accurate and that fraudulent or nuisance complaints may result in action by the University.

  Cancel