I started off this week experiemting with creating pieces of furniture in Fusion 360, I created some really intriguing peices such as a wall piece, a coffee table and even an outdoor chair. The wall art consists of a geoemtric panel which has these triangular latices attached to one another. The coffee table is rather […]

I redrew the whole autocad file again, this took a lot longer then I would of liked it to take, I though it would of taken an hour or so but it took around 5 hours as I had to also add in additional features like dimensions and a title block. By redoing the CAD […]

When looking through my work with Suzanne she discovered that the image I had chosen to trace for the floor plan of the Barcelona pavilion was from the internet instead of the supplied picture from learn, although I had previously referenced this in my blog, it makes me question in how much detail did they […]

This week I primarily focused on creating the Barcelona pavilion in sketch-up. I started the process by first importing the dwg from auto-cad and then tracing over the lines. When it came to making the base of the building I was having trouble with this as I had already traced over everything so I decided […]

In week 8 I went through my auto-cad file again with Suzanna I received some great feedback and some small tweaks that I needed to make such as adding in the windows correctly in autocad and creating the tiles on the floor. I also conducted some further exploration within sketchup experimenting with a range of […]

During this week I was able to work on my feedback from my formative submission. I was very satisfied with the detailed feedback received from my work. The great thing about these changes is that they were small mistakes that I could change with ease. Some of these changes consisted of deleting lines or making […]

Week 6 has consisted of making sure that all of my prior work is up to date such as that all my research was correct and improving upon any mistakes that I had made in my CAD designs in the past couple weeks. Some of the major edits I have done on my floor plan […]

What I learnt in week 5 is how to use layouts, viewports as well as how to create a drawing border. Other useful information that we went over in the lecture consists of features such as, annotations, plotting my  drawings.  When I was choosing the floor plan online I forgot that we were given a […]

Before I start on the pavilion I did some exercises to warm up and get to grips with the tools and feel comfortable within the software. Here you can see a few of the orthographic exercises that I completed. I then chose to create these in Fusion as I also wanted to improve my three […]

Unfortunately I was diagnosed with CoVid 19 during week 3, so I wasn’t feeling too well and found it rather challenging to focus and work, due to the state that I was in. I had a really bad cough, shivers and headache. Some of the highlights from this CAD course during this week consisted of […]


Report this page

To report inappropriate content on this page, please use the form below. Upon receiving your report, we will be in touch as per the Take Down Policy of the service.

Please note that personal data collected through this form is used and stored for the purposes of processing this report and communication with you.

If you are unable to report a concern about content via this form please contact the Service Owner.

Please enter an email address you wish to be contacted on. Please describe the unacceptable content in sufficient detail to allow us to locate it, and why you consider it to be unacceptable.
By submitting this report, you accept that it is accurate and that fraudulent or nuisance complaints may result in action by the University.